The memory module sockets have gold-plated metal contacts. Removing an External 3. All other drives use M3 metric screws. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. Connect external cables to the installed card, if needed. When removing the power supply power cable from the P1 connector on the system board, always follow these steps:. Remove the optical drive Removing an Optical Drive.
|Date Added:||23 January 2015|
|File Size:||55.83 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
In any mode, the maximum operational speed is determined by the slowest Hp dx2810 mt in the system. Slide the new drive into the hard drive cage 1aligning the drive with the four screw holes on the cage. If you are adding a drive to an empty drive bay for the first time, you must remove the knockout plate hp dx2810 mt the bay. The M3 metric retainer screws for optical drives are black.
HP Customer Support – Software and Driver Downloads
Static electricity can damage the electronic components of the computer or optional equipment. To prevent loss of work and damage to the hp dx2810 mt or drive:. It’s used to store data for programs sequences of instructions on a temporary basis. Disconnect the power cable 1 and data cable 2 from the back of the hard drive. Disconnect the data cable 1 and power cable 2 from the rear of the drive. Remove the access panel Hp dx2810 mt Panel. Keep cables away from major heat sources like the heatsink.
Solution and Diagnostic Data Collection. Installing an Optical Drive into the 5. Select the desired files and choose ‘Download files’ to start a batch download.
Heatsink retaining screws should be tightened in diagonally opposite pairs as in an X to evenly seat hp dx2810 mt heatsink to the processor.
If you are replacing an old drive with a new drive, use the four retainer screws from the old drive to install the new drive.
Remove the two retainer screws that secure the drive to the bay hp dx2810 mt then slide the drive forward and out of the bay 2. Battery The battery that comes with your computer provides power to the real-time clock and has a lifetime of about three years.
508460-001 System Board for HP Compaq Dx2810 MT (microtower) PC
hp dx2810 mt Connect the power cable 1 and data cable 2 to the rear of the optical drive. Keep these numbers available for use when contacting customer service for assistance. Europe, Middle East, Africa. If your system has only one SATA hard drive, you my connect the hard drive data cable to the dark blue connector labeled SATA1 to avoid any hard drive performance problems.
Installing an Internal 3. Cable Connections System board hp dx2810 mt are color-coded to make it easier to find the proper connection. To install an optical drive, refer to Installing an Optical Drive into the 5.
Type 1 Battery Holder. Remove the optical drive Removing an Optical Drive. Make sure the hard disk drive cables are facing the top of the drive cage.
Connect the power cable 1 and data hp dx2810 mt ddx2810 to the back of the hard drive.
HP Compaq dx Microtower PC Special Edition Specs – CNET
Compatible SSDs sort price: When the battery hp dx2810 mt removed or replaced, the CMOS settings will be cleared. The M3 metric retainer screws for diskette drives or media card readers are black. Front Bezel Prepare the computer for disassembly Preparation for Disassembly.