Configuration A On-board Audio: Buy a new fuse. If you want to send all sound from the computer to digital speakers or a stereo digital device, make sure the playback device labeled with Digital Output is selected. The red circle next to the blue speaker is removed when sound is no longer muted. If you cannot hear sound through the headphones, make sure that you are connecting the headphones into the correct connector, and try again.

Uploader: Meztirr
Date Added: 7 April 2015
File Size: 61.68 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 37536
Price: Free* [*Free Regsitration Required]

Download and install audio drivers from one of the following sites:. Disconnect the headphones and reconnect the speakers. If sound problems persist or no drivers could be found and installed, continue to the next step. Read all three items before making your choice. Copaq speaker hardware power, speakers, and fuses Check the speakers to see if the power cord is connected and that the speakers are receiving power.

Find and select the advanced menu items that correspond to audio. Select Yes or OK to save compaq presario sg1008il sound defaults compaq presario sg1008il sound pressing the Enter key.

If sound still cannot be heard after reconnecting the speakers, try replacing the speaker cable if possible or speaker fuse. If any of these volume controls are muted or set too low, the entire sound experience is affected.


Example of computers with 3 rear audio connectors. Properties button for Speakers. If you can hear sound through the headphones, the sound hardware on the computer is working compaq presario sg1008il sound the issue is most likely related to the speakers or the speaker cables. This page requires Javascript. If the computer was upgraded to Windows Vista, you might not be compaq presario sg1008il sound to use all the features of an integrated audio device that is compliant with Audio Codec ’97 AC ’97 specifications.

Press F10 and then press Enter to save and exit. Update the audio driver using Device Manager Update the audio driver using Device Manager as follows:. The red circle next to the blue speaker is removed when sound is no longer muted. Skund your browser’s documentation for specific instructions. Lots of sound occurring at one peak level stresses the speakers.

Compaq Presario SG1008IL Desktop PC Drivers Download

Find Solutions, ask questions, and share advice with other HP product owners. Checking volume sojnd mute settings The volume setting for one or more sound devices might be disabled or set too low.

If sound problems continue, continue to the next section. Configuration A Conpaq Audio: The on-board audio setting in the Compaq presario sg1008il sound must be set to match your particular compaq presario sg1008il sound hardware configuration. Example of computers with 6 rear audio connectors.


Use the driver recovery process to restore audio drivers for original sound ag1008il using the following steps:. Checking Device Manager If you cannot hear sound, check Device Manager to determine the state of the sound hardware:. If not, refer to instructions that came with the speakers. Selecting the type of Play Device as the default device yours might be different.

If the button displays a small red circle, the volume is muted. Test for sound in Windows by double-clicking the volume icon in the compaq presario sg1008il sound and then clicking the volume control slide in the master volume section. MS Fix it KB Install the new fuse, replace the fuse cap, apply power, turn the speakers on, and test for sound.

HP Compaq Presario SGIL drivers

If Device Status shows that the device is working correctly, the problem is probably related to sound settings, the speakers, or the cables. If you can hear a “ding” sound from all speakers when the slide bar adjuster is clicked, you are finished troubleshooting for no sound. The Volume Compaq presario sg1008il sound window opens.